View source for STS35 Temperature Sensor SKU: CQRSTS35A

=='''Description'''==
The STS35 temperature sensor from Sensirion gives a fully calibrated, linearized, and supply-voltage-compensated digital output and has an outstanding accuracy of up to +/–0.1Degree Celsius.

It provides an operating temperature range of -40 degree selsius to +125 degree celsius and up to 1MHz I2C communication rate. Besides, the sensor can heat up itself to dehumidify the chip, which means it can function properly in a certain level of humidity.

'''STS35 Chip Specification Download'''

[[Media: ST35.pdf]]
----

=='''Size Display'''==

[[image:CQRSTS35A-1.jpg|thumb|1000px| center]]
----
=='''Specifications'''==
'''STS35 Temperature Sensor Board Specifications'''
*Operating Voltage: 2.15V to 5.5V DC;
*Heating Power Consumption: 3.6mW to 33mW;
*Output Signal: I2C;
*Measuring Range: -40 Degree Celsius to +125 Degree Celsius;
*Accuracy: Plus/Minus 0.1 Degree Celsius;
*Resolution: 0.01 Degree Celsius;
*Preheat: Less Than or Equal to 1.5ms (Typical, 0.5ms);
*Response Time: More Than 2s;
*Operating Temperature: -40 Degree Celsius to +125 Degree Celsius;
*Size: 34.5* 26.8 * 2 (mm) / 1.35 * 1.05 * 0.08 (inch);
*Mounting Hole Size: M3 (3mm); Pitch 20mm.
'''Ocean Interface Cable Specifications'''
*Cable specifications: 22AWGMaterial: Silicone
*Withstand Voltage: Less Than 50V
*Withstand Current: Less Than 1000MA
*Length: 21cm
*Line Sequence: Black-Negative Power Supply; Red-Positive Power Supply; Green-SDA; Blue-SCL; Yellow-ADDR; Orange-RST.
----