Difference between revisions of "Crash Sensor"
(→Connection Diagram) |
(→Product Size) |
||
Line 6: | Line 6: | ||
=='''Product Size'''== | =='''Product Size'''== | ||
{|- | {|- | ||
− | |[[File:Crash Sensor-3.jpg |left| | + | |[[File:Crash Sensor-3.jpg |left|500px]] |
− | |[[File:Crash Sensor-4.jpg |left| | + | |[[File:Crash Sensor-4.jpg |left|500px]] |
|} | |} | ||
---- | ---- |
Revision as of 07:03, 29 July 2020
Introduction
A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force. Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small motors, solenoids, lamps, or other devices.
There is a press key on the sensor. During a collision, the sensor outputs a low level signal as the button is pressed, and maintains high level when released. The sensor comes with a JST PA SMT 3-Pin horizontal sticker and a buckle socket. Also, a JST PA SMT 3-Pin to DuPont female single-head wire is offered to facilitate wiring. Length: 210mm, buckle attached.
Product Size
Connection Diagram
Specifications
Sensor
- Operating Voltage: DC 3.3V-5V
- Dimensions: 28mm * 35mm * 8.4mm
- Fixing Hole Size: 3mm
Wire
- Withstand Voltage: <50V
- Withstand Current: <1000MA
- Length: 21CM
- Wire Sequence: Black-negative power supply, Red-positive power supply, Green-signal