4-CH 16-Bit ADS1115 ADC Module SKU: CQRADC001
Contents
Description
The 4-channel 16-bit ADS1115 ADC Module is a high-precision analog-to-digital conversion solution based on the TI ADS1115IDGSR chip. This module provides four 16-bit precision analog input channels, supports both 3.3V and 5V operation, and features a hardware-configurable I2C address. The module also integrates an NTC temperature measurement interface, enabling multi-channel signal acquisition and temperature monitoring.
Features
- High-Precision 16-bit ADC Chip: Based on the TI ADS1115IDGSR chip, it provides four 16-bit resolution analog input channels, enabling high-precision signal acquisition.
- Flexible Input Modes: Supports 4 single-ended inputs or 2 differential inputs, suitable for various sensor signal measurement scenarios.
- Configurable I2C Address: Configurable via the ADDR pin, supporting 4 I2C addresses to facilitate multi-device networking.
- Wide Sampling Rate Range: Supports programmable sampling rates from 8 SPS to 860 SPS, meeting the requirements of different applications.
- Integrated NTC Temperature Measurement Interface: Onboard MF52AT 10KΩ NTC temperature sensor interface with a B value of 3950K, ideal for temperature monitoring applications.
- Dual-Voltage Compatible Design: Supports 3.3V/5V dual-voltage operation, with a built-in LP5907 LDO providing stable 3.3V power.
- Automatic Level Conversion: I2C signals are automatically converted to 3.3V levels when powered by 5V, allowing direct connection to 3.3V microcontrollers.
- Standard Interface Design: Equipped with HY2.0mm 4P connectors and 2.54mm pin headers for easy connection to various development boards.
Pin Description and Size
Specification
Sensor Specifications
- Supply Voltage(VCC): 3.3V to 5.0V
- Analog Signal Detection Range: 0 to VCC
- Number of Analog Channels: 4
- ADC Bits: 16 Bit
- Operating Current: 2mA to 3mA (Not include sensor module)
- Interface Type: Ocean I2C
- Interface Level: High 3.3V, Low 0V
- Product Size: 32mm * 32mm(1.26in * 1.26in)
Ocean Interface Wire Specifications
- Cable specifications: 22AWG
- Material: Silicone
- Withstand Voltage: Less Than 50V
- Withstand Current: Less Than 1000MA
- Length: 21cm
- Line Sequence: Black-Negative Power Supply, Red-Positive Power Supply, Green-SDA, Blue-SCL.
