Difference between revisions of "Hall Sensor SKU: PZSHED0001"

From CQRobot-Wiki
Jump to: navigation, search
(Case and Test Code)
(Pin Description)
Line 12: Line 12:
 
----
 
----
 
=='''Pin Description'''==
 
=='''Pin Description'''==
 +
{|-
 +
|[[File:PZSHED0001-2.jpg |left|400px]]
 +
|}
 +
----
  
----
 
 
=='''Case and Test Code'''==
 
=='''Case and Test Code'''==
 
'''Arduino Connection Method'''
 
'''Arduino Connection Method'''

Revision as of 12:44, 12 January 2022

Hall Sensor

Description

The magnetic sensor based on the Hall induction principle can be used to detect magnetic materials (magnets), regardless of polarity, and the range can reach about 3cm (the detection range is related to the strength of magnetism). It has the advantages of being sensitive to magnetic field, simple structure, small size, wide frequency response, large output voltage change and long service life.

Note:It's a omnipolar magnet dectector so that it can not tell two polarities apart.


Specifications

  • Working Voltage: 3.3V to 5V
  • Output Signal: usually output low level, output high level when magnetism is detected (at the same time the onboard LED is on)
  • Product Size: 30mm * 22.0mm
  • Fixing Hole Size: 3mm

Pin Description

PZSHED0001-2.jpg

Case and Test Code

Arduino Connection Method