Difference between revisions of "ITR9608-Photo Sensor"

From CQRobot-Wiki
Jump to: navigation, search
(Introduction)
(Applications)
Line 20: Line 20:
 
*Pulse counter
 
*Pulse counter
 
----
 
----
 +
=='''Connection Diagram'''==
 +
{|-
 +
|[[File:ITR9608-Photo Sensor-2.jpg |left|850px]]
 +
|}
 +
----
 +
 
=='''Specifications'''==
 
=='''Specifications'''==
 
'''Sensor'''
 
'''Sensor'''

Revision as of 06:35, 29 July 2020

Introduction

The ITR9608 (Slot Optical Switch) is a gallium arsenide infrared emitting diode which is coupled with a silicon photo transistor in a plastic housing. The packaging system is designed to opt imizes the mechanical resolution, coupling efficiency, and insulates ambient light. The slot in the housing a provides a means of inte rrupting the signal with printer, scanner, copier, or other opaque material, switching the output from an”ON" to”OFF"state.

It's the photo interrupter sensor, also called smart car speed measuring module. The sensor comes with a JST PA SMT 3-Pin horizontal sticker and a buckle socket. Also, a JST PA 3-Pin to DuPont female single-head wire is offered to facilitate wiring. Length: 210mm, buckle attached.


Features

  • Wide gap between light emitter and detector (5.0mm)
  • High sensing accuracy
  • PWB mounting type package

Applications

  • Copier
  • Printer
  • Facsimile
  • Ticket vending machine
  • Opto-electronic switch
  • Motor speed detection
  • Pulse counter

Connection Diagram

ITR9608-Photo Sensor-2.jpg

Specifications

Sensor

  • Operating Voltage: DC 3.3V-5V
  • Dimensions: 28mm * 35mm * 8.4mm
  • Fixing Hole Size: 3mm

Wire

  • Withstand Voltage: <50V
  • Withstand Current: <1000MA
  • Length: 21CM
  • Wire Sequence: Black-negative power supply, Red-positive power supply, Green-signal