MicroUSB Battery Holder (3xAA)-FIT0362

From CQRobot-Wiki
Revision as of 09:08, 31 March 2018 by Yangguo (talk | contribs) (Galley)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
MicroUSB Battery Holder (3xAA)-FIT0362

Description

  • Compatible Controller Type: Beetle, Rduino Nano, Bluno, Bluno Nano, Leonardo.
  • Battery box comes with a Micro USB connector, compatible with Arduino interface with a micro USB compatible controller.
  • If your controller only micro USB interfaces, Such Microduino, you will find that the battery compartment is very convenient.
  • The battery cartridge can be loaded 3 5 3.6V for NiMH / NiCd rechargeable batteries, or 4.5V alkaline battery pack.

INTRODUCTION

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery holder via MicroUSB interface directly.

SPECIFICATION

  • Cell Quantity: 3
  • Battery type: AA
  • Cable length: 130mm(5.12 inch)
  • Material: Plastic
  • Storage Temperature: 25 Degree Celsius (77F, RoomTemperature)
  • Max Operate Temperature: 80 Degree Celsius (176F)
  • Size: 57mm * 48mm * 15mm(2.24 inch * 1.89 inch * 0.59 inch)


Display

FIT0362-1.jpg
FIT0362-2.jpg
FIT0362-3.jpg

DISTRIBUTION LIST

  • 1 * MicroUSB Battery Holder(3xAA)