Difference between revisions of "STS35 Temperature Sensor SKU: CQRSTS35A"
(→Specifications) |
(→Example and Test Code) |
||
| Line 36: | Line 36: | ||
=='''Example and Test Code'''== | =='''Example and Test Code'''== | ||
'''1. Arduino Connection Method''' | '''1. Arduino Connection Method''' | ||
| + | |||
[[File:CQRSTS35A-2.jpg|600px]] | [[File:CQRSTS35A-2.jpg|600px]] | ||
[[File:CQRSTS35A-3.jpg|600px]] | [[File:CQRSTS35A-3.jpg|600px]] | ||
---- | ---- | ||
Revision as of 05:34, 6 December 2022
Description
The STS35 temperature sensor from Sensirion gives a fully calibrated, linearized, and supply-voltage-compensated digital output and has an outstanding accuracy of up to +/–0.1Degree Celsius.
It provides an operating temperature range of -40 degree selsius to +125 degree celsius and up to 1MHz I2C communication rate. Besides, the sensor can heat up itself to dehumidify the chip, which means it can function properly in a certain level of humidity.
STS35 Chip Specification Download
Size Display
Specifications
STS35 Temperature Sensor Board Specifications
- Operating Voltage: 2.15V to 5.5V DC;
- Heating Power Consumption: 3.6mW to 33mW;
- Output Signal: I2C;
- Measuring Range: -40 Degree Celsius to +125 Degree Celsius;
- Accuracy: Plus/Minus 0.1 Degree Celsius;
- Resolution: 0.01 Degree Celsius;
- Preheat: Less Than or Equal to 1.5ms (Typical, 0.5ms);
- Response Time: More Than 2s;
- Operating Temperature: -40 Degree Celsius to +125 Degree Celsius;
- Size: 34.5* 26.8 * 2 (mm) / 1.35 * 1.05 * 0.08 (inch);
- Mounting Hole Size: M3 (3mm); Pitch 20mm.
Ocean Interface Cable Specifications
- Cable specifications: 22AWGMaterial: Silicone
- Withstand Voltage: Less Than 50V
- Withstand Current: Less Than 1000MA
- Length: 21cm
- Line Sequence: Black-Negative Power Supply; Red-Positive Power Supply; Green-SDA; Blue-SCL; Yellow-ADDR; Orange-RST.
Example and Test Code
1. Arduino Connection Method
