Difference between revisions of "TCS34725 Color Sensor"

From CQRobot-Wiki
Jump to: navigation, search
(Created page with "thumb|300px|right|TCS34725FN Color Sensor =='''Introduction'''== This is a color sensor that supports RGB color data and light intensity output via the I...")
 
(Specifications)
Line 15: Line 15:
 
*Maximum Rise Time: 300 ns
 
*Maximum Rise Time: 300 ns
 
*Resolution: 4-ch RGBC, 16-bit per ch
 
*Resolution: 4-ch RGBC, 16-bit per ch
*Recommended Measuring Distance: 2mm
+
*Recommended Measuring Distance: 20mm
 
*Dimension: 28mm * 25mm
 
*Dimension: 28mm * 25mm
 
*Mounting hole size: 3.0mm
 
*Mounting hole size: 3.0mm
 +
 
=='''Connection Diagram'''==
 
=='''Connection Diagram'''==
 
{|-
 
{|-

Revision as of 06:39, 29 December 2020

TCS34725FN Color Sensor

Introduction

This is a color sensor that supports RGB color data and light intensity output via the I2C interface. The color sensor is based on TCS34725FN color optical digital converter, it output red, green, blue (RGB) clear optical sensor value of digital. The integrated infrared blocking filter minimizes the infrared spectral of incident light , the sensor can accurately measures color. it has high sensitivity, wide dynamic range. Minimize IR and UV spectral component for accurate color measurements. It also has ambient light intensity detection and can be shielded interrupt.

Specifications

  • Product Category: Light to Digital Converters/TCS34725FN
  • Peak Wavelength: 525 nm
  • Maximum Operating Frequency: 400 kHz
  • Operating Supply Voltage: 3.3V to 5V
  • Operating Current: 235 uA
  • Maximum Operating Temperature: +70 Degree Celsius
  • Minimum Operating Temperature: -30 Degree Celsius
  • Interface Type: I2C
  • Maximum Fall Time: 300 ns
  • Maximum Rise Time: 300 ns
  • Resolution: 4-ch RGBC, 16-bit per ch
  • Recommended Measuring Distance: 20mm
  • Dimension: 28mm * 25mm
  • Mounting hole size: 3.0mm

Connection Diagram

Color Sensor-77.jpg

DEMO Code

Media:TCS34725_Color_Sensor_code.zip