Difference between revisions of "Metal DC Geared Motor w/Encoder CQGB37Y001"

From CQRobot-Wiki
Jump to: navigation, search
Line 32: Line 32:
  
 
==10:1==
 
==10:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 10:1
 
*Gear Ratio: 10:1
 
*Reducer L Length: 19mm
 
*Reducer L Length: 19mm
Line 47: Line 48:
  
 
==18.8:1==
 
==18.8:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 18.8:1
 
*Gear Ratio: 18.8:1
 
*Reducer L Length: 22mm
 
*Reducer L Length: 22mm
Line 62: Line 64:
  
 
==30:1==
 
==30:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 30:1
 
*Gear Ratio: 30:1
 
*Reducer L Length: 22mm
 
*Reducer L Length: 22mm
Line 77: Line 80:
  
 
==43.8:1==
 
==43.8:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 43.8:1
 
*Gear Ratio: 43.8:1
 
*Reducer L Length: 24mm
 
*Reducer L Length: 24mm
Line 92: Line 96:
  
 
==56.3:1==
 
==56.3:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 56.3:1
 
*Gear Ratio: 56.3:1
 
*Reducer L Length: 24mm
 
*Reducer L Length: 24mm
Line 107: Line 112:
  
 
==70:1==
 
==70:1==
 +
SPECIFICATION-6V
 
*Gear Ratio:  70:1
 
*Gear Ratio:  70:1
 
*Reducer L Length: 24mm
 
*Reducer L Length: 24mm
Line 122: Line 128:
  
 
==90:1==
 
==90:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 90:1
 
*Gear Ratio: 90:1
 
*Reducer L Length: 24mm
 
*Reducer L Length: 24mm
Line 137: Line 144:
  
 
==131:1==
 
==131:1==
 +
SPECIFICATION-6V
 
*Gear Ratio: 131:1
 
*Gear Ratio: 131:1
 
*Reducer L Length: 26.5mm
 
*Reducer L Length: 26.5mm

Revision as of 08:46, 2 April 2018

6V/12V Metal DC Geared Motor w/Encoder-CQRDJ0001

Description

  • This is metal DC geared motor w/Encoder, Operating voltage is 6V-12V. for Projects Such as Robot, Custom Servo, Arduino and 3D Printers.
  • The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 16CPR, double down the road, a total output of 64CPR.
  • These units have a 0.61 inch long, 6 mm(0.24 inch)-diameter D-shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
  • The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61 inch) apart.

NOTE

Do not screw too far into the mounting holes as the screws can hit the gears. CQRobot Manufacturer recommends screwing no further than 3mm (1/8 inch) into the screw hole.


6.25:1

SPECIFICATION-6V

  • Gear Ratio: 6.25:1
  • Reducer L Length: 19mm
  • No-load Speed: 880rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 1.5kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 6.25:1
  • Reducer L Length: 19mm
  • No-load Speed: 1760rpm
  • No-load Current: 250mA
  • Stall Torque: 3.1kg.cm
  • Stall Current: 6.5A

10:1

SPECIFICATION-6V

  • Gear Ratio: 10:1
  • Reducer L Length: 19mm
  • No-load Speed: 550rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 2.5kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 10:1
  • Reducer L Length: 19mm
  • No-load Speed: 1100rpm
  • No-load Current: 250mA
  • Stall Torque: 5.1kg.cm
  • Stall Current: 6.5A

18.8:1

SPECIFICATION-6V

  • Gear Ratio: 18.8:1
  • Reducer L Length: 22mm
  • No-load Speed: 292rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 4.3kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 18.8:1
  • Reducer L Length: 22mm
  • No-load Speed: 585rpm
  • No-load Current: 250mA
  • Stall Torque: 8.6kg.cm
  • Stall Current: 6.5A

30:1

SPECIFICATION-6V

  • Gear Ratio: 30:1
  • Reducer L Length: 22mm
  • No-load Speed: 183rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 6.8kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 30:1
  • Reducer L Length: 22mm
  • No-load Speed: 366rpm
  • No-load Current: 250mA
  • Stall Torque: 13kg.cm
  • Stall Current: 6.5A

43.8:1

SPECIFICATION-6V

  • Gear Ratio: 43.8:1
  • Reducer L Length: 24mm
  • No-load Speed: 125rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 8.9kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 43.8:1
  • Reducer L Length: 24mm
  • No-load Speed: 251rpm
  • No-load Current: 250mA
  • Stall Torque: 18kg.cm
  • Stall Current: 6.5A

56.3:1

SPECIFICATION-6V

  • Gear Ratio: 56.3:1
  • Reducer L Length: 24mm
  • No-load Speed: 97rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 11kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 56.3:1
  • Reducer L Length: 24mm
  • No-load Speed: 195rpm
  • No-load Current: 250mA
  • Stall Torque: 23kg.cm
  • Stall Current: 6.5A

70:1

SPECIFICATION-6V

  • Gear Ratio: 70:1
  • Reducer L Length: 24mm
  • No-load Speed: 78rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 14kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 70:1
  • Reducer L Length: 24mm
  • No-load Speed: 157rpm
  • No-load Current: 250mA
  • Stall Torque: 28kg.cm
  • Stall Current: 6.5A

90:1

SPECIFICATION-6V

  • Gear Ratio: 90:1
  • Reducer L Length: 24mm
  • No-load Speed: 61rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 18kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 90:1
  • Reducer L Length: 24mm
  • No-load Speed: 122rpm
  • No-load Current: 250mA
  • Stall Torque: 36kg.cm
  • Stall Current: 6.5A

131:1

SPECIFICATION-6V

  • Gear Ratio: 131:1
  • Reducer L Length: 26.5mm
  • No-load Speed: 41rpm (Plus/Minus 10%)
  • No-load Current: 120mA
  • Stall Torque: 22kg.cm
  • Stall Current: 3.0A

SPECIFICATION-12V

  • Gear Ratio: 131:1
  • Reducer L Length: 26.5mm
  • No-load Speed: 83rpm
  • No-load Current: 250mA
  • Stall Torque: 45kg.cm
  • Stall Current: 6.5A

SPECIFICATION-Encoder

  • Encoder Operating Voltage: 3.3V - 24V
  • Encoder Type: Hall (Incremental Type)
  • Encoder Resolution: 64CPR

Display

Motor2.jpg
Motor3.jpg
Motor4.jpg

Motor5.jpg
Motor6.jpg
Motor7.jpg

DISTRIBUTION LIST

  • 1 * 6V/12V Metal DC Geared Motor w/Encoder